PART OF CATALOG

Sealing disc | ER 20 DCONWS = 4,5

20.00

Application:
For sealing tools with internal cooling.


Note:
Sealing capacity up to 80 bar


Clamping range 0.5 mm (+0.1/ -0.4)

Vernier caliper | 0-150mm analogue | with thumb clamp

43.00

Construction:

  • Measuring surfaces allow for the measurement of external diameters, internal diameters, depths and steps
  • Stainless steel with surface hardened measuring faces

Delivery:

  • Warranty card
  • Instruction manual
  • Calibration certificate

Shell mill holder SK 40 – 32 – 100

75.00

Application:
For mounting milling cutters with transversal groove.


Note:
d = 40/d = 60: For large diameter face mill cutters with four additional threaded holes according to DIN 2079.


SK 30 without coolant exit bores on the end face

Delivery:
With drivers, cross head retaining screw and cylinder head retaining screw for cutters with central coolant. For d = 60 only with four fi xation screws according to DIN 912.


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Sealing disc | ER 40 DCONWS = 7,5

20.00

Application:
For sealing tools with internal cooling.


Note:
Sealing capacity up to 80 bar


Clamping range 0.5 mm (+0.1/?0.4)

Sealing disc | OZ 16 DCONWS = 11,0

17.00

Application:
For sealing tools with internal cooling.


Note:
Sealing capacity up to 80 bar


Clamping range 0.5 mm (+0.1/?0.4)

Clamping sleeves for taps with quick change DCONMS=25 | 9 x 7

55.00

Application:
For machines with rigid tapping. For safe clamping of taps in end mill holders according to DIN 1835 B.

ER-Collet with cooling channel holes ER40 | 472EC | < 15µm | O 6

53.00

Application:
For mounting straight-shank tools in collet chucks DIN 6499.


Note:
Only nominal size d can be clamped, with cooling channels. In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet. (applicable up to 21 bar)

OZ-Collet OZ16 | 415E | < 15µm | O 6 - 5,5

11.00

Application:
For mounting straight-shank tools in collet chucks DIN 6391. For highest axial and radial loading.

FREE CONSULTATION

Have questions?
Leave a request