PART OF CATALOG

End mill holder Weldon BT 40 – 20 – 63

38.00

Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).


Delivery:
With clamping screw


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

OZ-Collet OZ32 | 467E | < 15µm | O 22 - 21,5

24.00

Application:
For mounting straight-shank tools in collet chucks DIN 6391. For highest axial and radial loading.

Collets set | 5 µm | ER40 | 472EP | 23-part kit in wooden socket DIN 6499 B (ISO 15488 B)

851.00

Application:
For mounting straight-shank tools in collet chucks DIN 6499. To use for high speed cutting and high precision milling.


Note:
High flexibility: Large holding capacity up to –1 mm

ER-Collet ER40 | 472E | < 15µm | O 14 - 13

14.00

Application:
For mounting straight-shank tools in collet chucks DIN 6499.


Note:
High flexibility: Large holding capacity up to –1 mm

CNC-Werkzeugeinsatz | HSK 63-A+F | PSK

5.00

Application:
The optimal storage of CNC tools.


The tool inserts are made of oil-resistant,
break-proof and impact-resistant ABS plastic
and are noted for their tailored inner struts.
The tapered tool holder is thus optimally
centred.

All tool sizes can be combined

ER-Collet with seal for IC ER40 | 472EH | < 15µm | O 26

58.00

Application:
Collets sealed for high pressure cooling 120 bar with IC DIN 6499 B (ISO 15488 B) ER-system


Note:
Only nominal size d can be clamped (applicable up to 120 bar). In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet.

FREE CONSULTATION

Have questions?
Leave a request