PART OF CATALOG

Hydraulic expansion chuck HSK 63 – 12 – 90

€290.00

Application:
For mounting straight-shank tools acc. DIN 1835 form A+B+E and DIN 6535 form HA+HB+HE (larger than dia. 20 mm only with reduction sleeve).


Note:
l1 = max. clamping depth l2 = max. length adjustment range


Delivery:
Without wrench


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

3 point internal micrometer | digital 30-40mm | IP65 | reading 0,001mm

€700.00

Construction:

  • Graduation: 0.001mm
  • Measuring contact points are designed to allow measurements near to the bottom of blind holes
  • reading parts brushed chromium-plated
  • Measuring surfaces are carbide
  • Ratchet stop

Delivery:

  • Setting rings
  • Extension rod >6mm
  • Warranty card
  • Instruction manual
  • Calibration certificate
  • LR44 1,5V Battery

Shell mill holder HSK 63 – 40 – 60

€162.00

Application:
For mounting milling cutters with transversal groove.


Note:
d = 40/d = 60: For large diameter face mill cutters with four additional threaded holes according to DIN 2079.


SK 30 without coolant exit bores on the end face

Delivery:
With drivers, cross head retaining screw and cylinder head retaining screw for cutters with central coolant. For d = 60 only with four fi xation screws according to DIN 912.


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

HSS-E spiral flute taps fine thread M6 4,5×3,4 P=0,5 DIN 374

€24.00

Application:

1. Thread configuration with a special design, prevents overfeeding, thin thread and pitch diameter oversize.
2. Flute geometry with special design, better chip evacuation, prevents chip clogging, improves thread quality
3. Excellent performance on various work material: Stainless steel, carbon steel, alloyed steel, tool steel

OZ-Collet OZ25 | 462E | < 15µm | O 6 - 5,5

€12.00

Application:
For mounting straight-shank tools in collet chucks DIN 6391. For highest axial and radial loading.

Milling arbors for screw-in cutters SK 40 – M10 – 94 – LB75

€116.00

Application:
For mounting screw-in cutters with thread.


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

ER-Collet chuck SK 40 – 1/10 – 100 | ER 16

€58.00

Application:
For mounting straight-shank tools in collets.

Delivery:
With balanced clamping nut


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

FREE CONSULTATION

Have questions?
Leave a request