PART OF CATALOG

ER-Precision collet ER32 | 470EPP | < 3 µm | O 9,5

€45.00

Application:
For mounting straight-shank tools in collet chucks ISO 15488 (ex. DIN 6499).

Version:
System concentricity and repetition accuracy 3 µm (3?D, maximum = 50 mm), in conjunction with „KEMMLER Precision collet chuck ER".

Suitable for:
KEMMLER Precision collet chuck ER or standard collet chuck Spannfutter ISO 15488 (ex. DIN 6499).

Note:
The collet clamping O range is always up to 0.5 mm less than nominal.

ER-Collet with cooling channel holes ER40 | 472EC | < 15µm | O 17

€53.00

Application:
For mounting straight-shank tools in collet chucks DIN 6499.


Note:
Only nominal size d can be clamped, with cooling channels. In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet. (applicable up to 21 bar)

Drill chuck adaptor DIN 238 BT 50 – B16

€69.00

Application:
For mounting drill chucks.


Delivery:


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

End mill holder Weldon HSK 32 – 06 – 60

€109.00

Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).


Delivery:
With clamping screw


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

Quick change adaptors with safety clutch Size 1 | M8 | 8 x 6,2 | DIN 371

€35.00

Application:
For mounting taps. For right-hand and left-hand threads. Type with adjustable safety clutch, which prevents the breaking of taps.


Note:
Quick change adaptors with safety clutch are supplied with a predefi ned torque, corresponding to the sizes of the threads.

Hydraulic expansion chuck SK 50 – 12 – 110

€441.00

Application:
For mounting straight-shank tools acc. DIN 1835 form A+B+E and DIN 6535 form HA+HB+HE (larger than dia. 20 mm only with reduction sleeve).


Note:
l1 = max. clamping depth l2 = max. length adjustment range


Delivery:
With wrench


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

HSS-E spiral flute taps M12 9×7 P=1,75

€27.00

Application:

1. Thread configuration with a special design, prevents overfeeding, thin thread and pitch diameter oversize.
2. Flute geometry with special design, better chip evacuation, prevents chip clogging, improves thread quality
3. Excellent performance on various work material: Stainless steel, carbon steel, alloyed steel, tool steel

FREE CONSULTATION

Have questions?
Leave a request