PART OF CATALOG

ER-Precision collet ER8 | 4004EP | < 5µm | O 5,0 - 4,5

€25.00

Application:
For mounting straight-shank tools in collet chucks DIN 6499. To use for high speed cutting and high precision milling.


Note:
Clamping capacity up to –0,5 mm

End mill holder Weldon BT 50 – 06 – 63

€80.00

Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).


Delivery:
With clamping screw


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

ER-Collet with cooling channel holes ER16 | 426EC | < 15µm | O 3

€38.00

Application:
For mounting straight-shank tools in collet chucks DIN 6499.


Note:
Only nominal size d can be clamped, with cooling channels. In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet. (applicable up to 21 bar)

OZ-Collet chuck BT 30 – 2/25 – 60 | OZ 25

€76.00

Application:
For mounting straight-shank tools in collets.


Delivery:
With ball bearing clamping nut


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Digital caliper heavy duty | 0-500mm with data output | reading 0,01mm

€372.00

Construction:

  • Resolution: .0005" / 0.01mm
  • Designed with fine adjustment to allow precise movement of the slider
  • Internal measurement jaws are rounded to provide accurate measurement of internal diameters
  • Minimum internal diameter measurement capability of 20mm
  • Inch/Metric conversion
  • Zero setting at any position

Delivery:

  • Warranty card
  • Instruction manual
  • Calibration certificate
  • CR2032 3,0V Battery

FREE CONSULTATION

Have questions?
Leave a request