PART OF CATALOG

ER-Precision collet ER40 | 472EP | < 5µm | O 23 - 22

€37.00

Application:
For mounting straight-shank tools in collet chucks DIN 6499. To use for high speed cutting and high precision milling.


Note:
High flexibility: Large holding capacity up to –1 mm

ER-Precision collet | stainless steel ER25 | 430ESP | < 5 µm | O 13,0 - 12,5

€42.00

- Rustproof
- Stainless steel 1.4021 x 20Cr13
- HRC 43-47
- Longer-lived than standard collets
- Higher repeat-accuracy
- Maximum concentricity <0,005mm
- Honed collet boring
- Especially suitable fore wire EDM

Reduction sleeve for boring bar holders DCONMS=40 | DCONWS=18

€34.00

Application:
Reduction for mounting tools with straightshank, such as precision boring bars.

Sealing disc | OZ 25 DCONWS = 15,5

€15.00

Application:
For sealing tools with internal cooling.


Note:
Sealing capacity up to 80 bar


Clamping range 0.5 mm (+0.1/?0.4)

KPS-Prazisionsspannzange abgedichtet KPS 16 | < 5µm | O 9,0

€57.00

Application:
For mounting straight-shank tools in collet chucks KPS-system. To use for high speed cutting and high precision milling.

OZ-Collet chuck SK 50 – 3/32 – 73 | OZ 32

€113.00

Application:
For mounting straight-shank tools in collets.

Delivery:
With ball bearing clamping nut


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Sealing disc | OZ 25 DCONWS = 3,5

€18.00

Application:
For sealing tools with internal cooling.


Note:
Sealing capacity up to 80 bar


Clamping range 0.5 mm (+0.1/?0.4)

End mill holder Weldon BT 40 – 06 – 100

€56.00

Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).


Delivery:
With clamping screw


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

FREE CONSULTATION

Have questions?
Leave a request