PART OF CATALOG

KPS-Prazisionsspannzange KPS 16 | < 5µm | O 9,0-8,5

€42.00

Application:
For mounting straight-shank tools in collet chucks KPS-system. To use for high speed cutting and high precision milling.

Quick change adaptors with safety clutch Size 1 | M8 | 8 x 6,2 | DIN 371

€35.00

Application:
For mounting taps. For right-hand and left-hand threads. Type with adjustable safety clutch, which prevents the breaking of taps.


Note:
Quick change adaptors with safety clutch are supplied with a predefi ned torque, corresponding to the sizes of the threads.

OZ-Collet chuck BT 40 – 2/16 – 70 | OZ 16

€80.00

Application:
For mounting straight-shank tools in collets.

Delivery:
With ball bearing clamping nut


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Morse taper adaptor BT 30 – 3 – 75

€85.00

Application:
For mounting tools with Morse taper shank and tang according to DIN 228-1 form B.


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

End mill cutter 90° 24,7mm – 25mm Shank after DIN 1835B

€229.00

  • For ISO Inserts APKT 1003... / APHX 1003...
  • With internal cooling
  • Nickel plated
  • Shank after DIN 1835B
  • Application in all materials
  • Delivery: without inserts

Hydraulic expansion chuck HSK 100 – 25 – 150

€539.00

Application:
For mounting straight-shank tools acc. DIN 1835 form A+B+E and DIN 6535 form HA+HB+HE (larger than dia. 20 mm only with reduction sleeve).


Note:
l1 = max. clamping depth l2 = max. length adjustment range


Delivery:
Without wrench


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Clamping sleeves for taps with quick change DCONMS=25 | 9 x 7

€55.00

Application:
For machines with rigid tapping. For safe clamping of taps in end mill holders according to DIN 1835 B.

FREE CONSULTATION

Have questions?
Leave a request