PART OF CATALOG

Drill chuck adaptor DIN 238 SK 40 – B 16

€52.00

Application:
For mounting drill chucks.



  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Alu UMG solid carbide ball nose end mill 4mm ball nose end mill 2 flutes

€28.00

Dc          = 4
d            = 6
R +-0,01 = R2,0
L            = 57
Lc           = 8
L1           = 12
D1          = 3,7

 

ER-Collet chuck SK 30 – 2/13 – 100 | ER 20

€76.00

Application:
For mounting straight-shank tools in collets.


Delivery:
With balanced clamping nut


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Shrink chuck 4,5° with cooling channels SK 50 – 25 – 100

€245.00

Application:
For mounting tools with straight shanks.


Note:
Toolholders suitable for induction-, contact- and hot air shrink units. O 3, 4, 5 with h4-tolerance and O 6 – O 32 with h6-tolerance


For O 3, 4 and 5 mm only solid carbide tool shanks must be used!


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

ER-Precision collet ER32 | 470EPP | < 3 µm | O 18,0

€45.00

Application:
For mounting straight-shank tools in collet chucks ISO 15488 (ex. DIN 6499).

Version:
System concentricity and repetition accuracy 3 µm (3?D, maximum = 50 mm), in conjunction with „KEMMLER Precision collet chuck ER".

Suitable for:
KEMMLER Precision collet chuck ER or standard collet chuck Spannfutter ISO 15488 (ex. DIN 6499).

Note:
The collet clamping O range is always up to 0.5 mm less than nominal.

End mill holder Weldon SK 40 – 10 – 130

€73.00

Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).


Delivery:
With clamping screw


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

ER-Collet chuck SK 40 – 3/26 – 80 | ER 40

€111.00

Application:
For mounting straight-shank tools in collets.


Delivery:
With balanced clamping nut


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

Plug gauge | 12mm | H7 accuracy DIN 7162|7164 | size DIN 2245

€28.00

Construction:

  • Hardened steel
  • Plug Gauge Accuracy according to DIN 7162/7164
  • Plug gauge sizes according to DIN 2245

Delivery:
Calibration certificate

FREE CONSULTATION

Have questions?
Leave a request