PART OF CATALOG

End mill holder Weldon with cooling channels BT 50 – 32 – 105

101.00

Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).


Delivery:
With clamping screw and O-ring


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Sealing disc | ER 16 DCONWS = 1,5

20.00

Application:
For sealing tools with internal cooling.


Note:
Sealing capacity up to 80 bar


Clamping range 0.5 mm (+0.1/?0.4)

Pull studs ~ISO 7388-3 | Form AD | M16 | with drill through | incl. O-ring

14.00

Application:

  • For tools with taper shanks DIN 69871 and JIS B 6339 (MAS-BT)
  • In machining centres (machines with automatic tool changers)
  • In NC machines (machines without automatic tool changers)

Micrometer | analogue | 150 – 175 reading 0,01mm

86.00

Construction:

  • Graduation: 0.01mm
  • Flatness: 0.6my
  • Carbide tipped measuring faces
  • Ratchet Stop

Delivery:

  • S-wrench, Standard (over 25mm range)
  • Warranty card
  • Instruction manual
  • Calibration certificat

Collets set | 5 µm | ER11 | stainless steel 4008 ESP

264.00

- Rustproof
- Stainless steel 1.4021 x 20Cr13
- HRC 43-47
- Longer-lived than standard collets
- Higher repeat-accuracy
- Maximum concentricity <0,005mm
- Honed collet boring
- Especially suitable fore wire EDM

End mill holder Weldon SK 40 – 08 – 160

81.00

Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).


Delivery:
With clamping screw


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

High Performance Milling Chuck HSK-A 63-20-95 DIN 69893 Form A HKS-system in wooden box

767.00

Application:
For mounting straight-shank tools.


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

Hydraulic expansion chuck HSK 100 – 16 – 100

350.00

Application:
For mounting straight-shank tools acc. DIN 1835 form A+B+E and DIN 6535 form HA+HB+HE (larger than dia. 20 mm only with reduction sleeve).


Note:
l1 = max. clamping depth l2 = max. length adjustment range


Delivery:
Without wrench


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

FREE CONSULTATION

Have questions?
Leave a request