PART OF CATALOG

ER-Precision collet | stainless steel ER32 | 470ESP | < 5 µm | O 13,0 - 12,5

44.00

- Rustproof
- Stainless steel 1.4021 x 20Cr13
- HRC 43-47
- Longer-lived than standard collets
- Higher repeat-accuracy
- Maximum concentricity <0,005mm
- Honed collet boring
- Especially suitable fore wire EDM

Ring gauge “NO GO” M30 | 6g ISO-metric thread | DIN 13

64.00

Construction:

  • Hardened steel
  • ISO-Metric Thread
  • DIN 13
  • 6g

Delivery:
Calibration certificate

HSS-E spiral flute taps fine thread M12 9×7 P=1,5 DIN 374

19.00

Application:

  1. Thread configuration with a special design, prevents overfeeding, thin thread and pitch diameter oversize.
  2. Flute geometry with special design, better chip evacuation, prevents chip clogging, improves thread quality
  3. Excellent performance on various work material: Stainless steel, carbon steel, alloyed steel, tool steel

ER-Precision collet | stainless steel ER20 | 428ESP | < 5 µm | O 8,5 - 8,0

41.00

- Rustproof
- Stainless steel 1.4021 x 20Cr13
- HRC 43-47
- Longer-lived than standard collets
- Higher repeat-accuracy
- Maximum concentricity <0,005mm
- Honed collet boring
- Especially suitable fore wire EDM

Axial drilling head

1,126.00

Adaptive interface machine direction (ADINTMS): BMT driven turret interface -size BT65A


n (max. min-1) = 6000
T (max. Nm) = 60

ER-Collet chuck SK 30 – 2/20 – 50 | ER 32

88.00

Application:
For mounting straight-shank tools for woodworking in collets.


Delivery:
With balanced clamping nut


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Shrink chuck 4,5° SK 40 – 25 – 100

140.00

Application:
For mounting tools with straight shanks.


Note:
Toolholders suitable for induction-, contact- and hot air shrink units. O 3, 4, 5 with h4-tolerance and O 6 – O 32 with h6-tolerance


For O 3, 4 and 5 mm only solid carbide tool shanks must be used!


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined
FREE CONSULTATION

Have questions?
Leave a request