PART OF CATALOG

ER-Gewindebohrer-Spannzange IK ER25 | 430GA | < 15µm | 4 x 3

44.00

Application:
For machines with rigid tapping. For safe clamping of taps. Collets sealed with seal for IC.

Hydraulic expansion chuck BT 50-32-110 JIS B 6339 (MAS-BT) AD/B in wooden box

1,178.00

Application:
For mounting straight-shank tools acc. DIN 1835 form A+B+E and DIN 6535 form HA+HB+HE (larger than dia. 20 mm only with reduction sleeve).


Note:
l1 = max. clamping depth l2 = max. length adjustment range


Delivery:
With wrench


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Sealing disc | OZ 25 DCONWS = 20,0

15.00

Application:
For sealing tools with internal cooling.


Note:
Sealing capacity up to 80 bar


Clamping range 0.5 mm (+0.1/?0.4)

Steel boring bar A0810H.SDUC.R07

60.00

  • Low-vibration boring bars
  • With internal cooling
  • Longer durability of inserts
  • For longitudinal and plane turning
  • Setting angle: 93°
  • Delivery: without inserts

End mill holder Weldon with cooling channels PSK 63 – 06 – 100

289.00

Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).
With coolant channels for optimal coolant at the cutting edge.


Delivery:
With clamping screw


Note:
From DCONWS = 25 on two clamping screws
DCONWS = 6 to 18 with two coolant channels
DCONWS = 20 to 40 with four coolant channels
For tools with through coolant an O-ring must be used.

Quick change tapping chuck PSK 40 – M5-M22 – Gr. 2

791.00

Application:
For the chucking of quick change adaptors for taps.


Note:
On machining centres without synchronised spindles.



  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

FREE CONSULTATION

Have questions?
Leave a request