PART OF CATALOG

ER-Collet ER16 | 426E | < 15µm | O 2 - 1,5

10.00

Application:
For mounting straight-shank tools in collet chucks DIN 6499.


Note:
High flexibility: Large holding capacity up to –1 mm

HSSE twist drill 135° 6,8 mm DIN 338 | TIN coating

7.00

Note:
Particularly robust and strong due to strengthened core. Profile ground, with high concentricity.

Tapping chucks for synchronisation 25 – M3-M20 | ER 25

248.00

Application:
For machining centres with synchronous spindle.


Note:

  • Synchro tapping chucks compensate synchronisation errors.
  • Minimal length compensation on compression and expansion balances very small pitch differences between synchro spindle and tap, which can cause high frictional forces on the thread flanks.
  • A possible increase of axial force during the tapping process is reduced to a minimum.
  • Suitable for internal coolant.
  • Coolant pressure up to max. 100 bar.


With balanced clamping nut

End mill holder Weldon BT 40 – 08 – 50

85.00

Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).


Delivery:
With clamping screw


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

Hydraulic expansion chuckSK 40-32-117 DIN 69871 AD/B in wooden box

1,061.00

Application:
For mounting straight-shank tools acc. DIN 1835 form A+B+E and DIN 6535 form HA+HB+HE (larger than dia. 20 mm only with reduction sleeve).


Note:
l1 = max. clamping depth l2 = max. length adjustment range


Delivery:
Without wrench


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Test arbor HSK 63 – 40 – 346

383.00

Application:
For the inspection of machine tools according to ISO recommendation R230 or for testing the tool spindle.

Delivery with test certificate


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

FREE CONSULTATION

Have questions?
Leave a request