PART OF CATALOG

Plug gauge | 48mm | H7 accuracy DIN 7162|7164 | size DIN 2245

75.00

Construction:

  • Hardened steel
  • Plug Gauge Accuracy according to DIN 7162/7164
  • Plug gauge sizes according to DIN 2245

Delivery:
Calibration certificate

Combi shell mill holder SK 40 – 16 – 55

95.00

Application:
For mounting milling cutters with transverse or longitudinal groove.

With retaining screw, driving ring and feather key


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

Milling arbors for screw-in cutters SK 40 – M16 – 24 – LB5

100.00

Application:
For mounting screw-in cutters with thread.


Delivery:

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

HSSE twist drill 135° 3,9 mm DIN 338 | TIN coating

4.00

Note:
Particularly robust and strong due to strengthened core. Profile ground, with high concentricity.

Shrink chuck 4,5° BT 50 – 25 – 160

233.00

Application:
For mounting tools with straight shanks.


Note:
Toolholders suitable for induction-, contact- and hot air shrink units. O 3, 4, 5 with h4-tolerance and O 6 – O 32 with h6-tolerance


For O 3, 4 and 5 mm only solid carbide tool shanks must be used!


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

Claw jaws set (Pair) for AVQ-160 | AVL-160 | ALQ-160 |

290.00

Version:
Jaws with grip serrations und fine step for workpieces with max. edge radius 1 mm, clamping depth 2 mm

  • For use on vises
  • Simple, safe clamping of parallel raw and sawn parts
  • Hydraulic or manual clamping
  • Positive clamping due to penetration of the hardened claw tips
  • High holding forces: increase by a factor of 3 to 5 compared to standard jaws
  • Low material loss
  • Shortened processing times and reduction of production and unit costs

HSSE twist drill 135° 5,9 mm DIN 338 | TIN coating

6.00

Note:
Particularly robust and strong due to strengthened core. Profile ground, with high concentricity.

FREE CONSULTATION

Have questions?
Leave a request