PART OF CATALOG

End mill holder Weldon with cooling channels SK 40 – 18 – 130

98.00

Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).


Delivery:
With clamping screw and O-ring


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

End mill holder Whistle-Notch SK 40 – 32 – 100

64.00

Application:
For mounting straight-shank tools and inclined flat according to DIN 1835 form E (Whistle Notch).


Delivery:
With clamping screw and axial adjustment bolt


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

End mill holder Whistle-Notch BT 50 – 16 – 80

81.00

Application:
For mounting straight-shank tools and inclined flat according to DIN 1835 form E (Whistle Notch).


Delivery:
With clamping screw and axial adjustment bolt


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

ER-Gewindebohrer-Spannzange IK ER40 | 472GA | < 15µm | 20 x 16

48.00

Application:
For machines with rigid tapping. For safe clamping of taps. Collets sealed with seal for IC.

Shrink chuck 4,5° PSK 50 – 20 – 85

340.00

Application:
For mounting tools with straight shanks.


Note:
Toolholders suitable for induction-, contact- and hot air shrink units. O 6 – O 32 with h6-tolerance


For O 3, 4 and 5 mm only solid carbide tool shanks must be used!
  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

High Performance Milling Chuck SK 50-32-90 DIN 69871 AD/B HKS-system in wooden box

618.00

Application:
For mounting straight-shank tools.


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

HSS-E spiral flute taps M30 22×18 P=3,5

114.00

Application:

1. Thread configuration with a special design, prevents overfeeding, thin thread and pitch diameter oversize.
2. Flute geometry with special design, better chip evacuation, prevents chip clogging, improves thread quality
3. Excellent performance on various work material: Stainless steel, carbon steel, alloyed steel, tool steel

OZ-Precision collet OZ32 | 467EP | < 5µm | O 5 - 4,5

35.00

Application:
For mounting straight-shank tools in collet chucks DIN 6391. To use for high speed cutting and high precision milling.

FREE CONSULTATION

Have questions?
Leave a request