PART OF CATALOG

OZ-Collet OZ16 | 415E | < 15µm | O 4 - 3,5

11.00

Application:
For mounting straight-shank tools in collet chucks DIN 6391. For highest axial and radial loading.

ER-Collet chuck SK 40 – 1/7 – 160 | ER 11 | Mini

126.00

Application:
For mounting straight-shank tools in collets.


Delivery:
With ER-Mini-nut


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

ER-Spannzange mit Kuhlkanalen ER32 | 470ECC | < 15µm | O 15

48.00

Application:
For mounting straight-shank tools in collet chucks DIN 6499.


Note:
Only nominal size d can be clamped, with cooling channels. In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet. (applicable up to 21 bar)

ER-Precision collet | stainless steel ER25 | 430ESP | < 5 µm | O 16,0 - 15,5

42.00

- Rustproof
- Stainless steel 1.4021 x 20Cr13
- HRC 43-47
- Longer-lived than standard collets
- Higher repeat-accuracy
- Maximum concentricity <0,005mm
- Honed collet boring
- Especially suitable fore wire EDM

CNC Werkzeugeinsatze | Typ 2 Zyl / VDI 40

14.00

The tool inserts are made of oil-resistant,
break-proof and impact-resistant ABS plastic
and are noted for their tailored inner struts.
The tapered tool holder is thus optimally
centred.

The insert is clicked into our grid system with
a clip and can be moved in steps of 25 mm
without a tool.

Nubs on the top of the inserts.
In this way, no adhesion occurs and the tool
is prevented from attaching itself by vacuum

All tool sizes can be combined

Boring bar blank HSK 100 – 97,5 – 250

238.00

Application:
For the manufacturing of special tools.


Note:
Cone and flange hardened and grinded. Soft body for later processing.


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Hydraulic expansion chuck HSK 63 – 10 – 85

290.00

Application:
For mounting straight-shank tools acc. DIN 1835 form A+B+E and DIN 6535 form HA+HB+HE (larger than dia. 20 mm only with reduction sleeve).


Note:
l1 = max. clamping depth l2 = max. length adjustment range


Delivery:
Without wrench


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

OZ-Collet OZ25 | 462E | < 15µm | O 20 - 19,5

12.00

Application:
For mounting straight-shank tools in collet chucks DIN 6391. For highest axial and radial loading.

FREE CONSULTATION

Have questions?
Leave a request