Click to enlarge
Combi shell mill holder SK 40 - 27 - 55 €98.00
Back to products
Shrink chuck 4,5° SK 40 - 20 - 80 €140.00

Quick change tapping chuck SK 40 – M3-M14 – Gr.1

€354.00

Application:
For the chucking of quick change adaptors for taps.

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined
TRMAX

ADINTMS

DUAL CONTACT ~ISO 7388-1
ADINTWS

SWB – Schnellwechselaufnahme
BD

CNSC

AD
DCONWS

19
DCP

DCPS

LCOMP

LPR

63
SK

SK-DC 40
Spannbereich

SZID

Compare
Add to wishlist
Order Number: DC.402.16.12 Categories: ,
Description

Product information “Quick change tapping chuck SK 40 – M3-M14 – Gr.1”

Application:
For the chucking of quick change adaptors for taps.

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined
2D & 3D Zeichnungen
Download DC.402.16.12 D 3D-Zeichnung.pdf
Download DC.402.16.12 D 3D-Zeichnung.stp

Related products

Compare

ER-Collet chuck SK 40 – 1/10 – 100 | ER 16

,
€114.00

Application:
For mounting straight-shank tools in collets.

Delivery:
With balanced clamping nut

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined
Add to wishlist
Add to cart
Quick view
Compare

End mill holder Weldon SK 40 – 14 – 100

,
€90.00

Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).

Delivery:
With clamping screw

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined
Add to wishlist
Add to cart
Quick view
Compare

ER-Collet chuck SK 40 – 1/10 – 160 | ER 16

,
€146.00

Application:
For mounting straight-shank tools in collets.

Delivery:
With balanced clamping nut

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined
Add to wishlist
Add to cart
Quick view
Compare

Milling Chuck SK 40 – 32 – 105

,
€336.00

Application:
For mounting straight-shank tools.

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined
Add to wishlist
Add to cart
Quick view
Compare

End mill holder Weldon SK 40 – 16 – 100

,
€90.00

Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).

Delivery:
With clamping screw

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined
Add to wishlist
Add to cart
Quick view
Compare

End mill holder Weldon SK 40 – 10 – 50

,
€75.00

Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).

Delivery:
With clamping screw

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined
Add to wishlist
Add to cart
Quick view
Compare

End mill holder Weldon SK 40 – 14 – 50

,
€75.00

Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).

Delivery:
With clamping screw

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined
Add to wishlist
Add to cart
Quick view
Compare

ER-Collet chuck SK 40 – 2/20 – 100 | ER 32

,
€119.00

Application:
For mounting straight-shank tools in collets.

Delivery:
With balanced clamping nut

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined
Add to wishlist
Add to cart
Quick view