Product information “Milling arbors for screw-in cutters PSK 63 – M10 – 105 – LB75”
Milling arbors for screw-in cutters PSK 63 – M10 – 105 – LB75
€289.00
| TQX |
40 Nm |
|---|---|
| ADINTMS |
CCS – Polygonschaftkegel |
| ADINTWS |
Einschraubfräser |
| Auswuchtgüte |
25.000 1/min, G2,5 |
| BD1 | |
| BD2 | |
| DCONWS |
10,5 |
| LB | |
| LPR |
105 |
| PSK | |
| Rundlauf |
< 3µm |
| THSZWS |
Related products
End mill holder Weldon with cooling channels PSK 63 – 06 – 100
Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).
With coolant channels for optimal coolant at the cutting edge.
Delivery:
With clamping screw
Note:
From DCONWS = 25 on two clamping screws
DCONWS = 6 to 18 with two coolant channels
DCONWS = 20 to 40 with four coolant channels
For tools with through coolant an O-ring must be used.
Test arbor PSK 50 – 32 – 180
Application:
For the inspection of machine tools according to ISO recommendation R230 or for testing the tool spindle.
- All holders are made of forged steel
- Specific, low warpage hardened
- Surface hardened HRC 58~60
- Hardening depth 0,8mm~0,9mm
- Taper angle tolerance < AT 3 according to DIN 2080
- Surface roughness Ra < 0,4 µm
- Tensile strength in the core of min. 800 N/mm? after DIN
- All functional surfaces fine machined
