Product information “ER-Collet chuck PSK 63 – 3/26 – 100 | ER 40”
PSK = PSK 63
Capacity = 3 – 26 (ER 40)
A = 100
D = 63
Application:
For mounting straight-shank tools in collets.
Delivery:
With balanced clamping nut
ER-Collet chuck PSK 63 – 3/26 – 100 | ER 40
€235.00
PSK = PSK 63
Capacity = 3 – 26 (ER 40)
A = 100
D = 63
Application:
For mounting straight-shank tools in collets.
Delivery:
With balanced clamping nut
| Typ |
472E, ER 40 |
|---|---|
| ADINTMS |
CCS – Polygonschaftkegel |
| ADINTWS |
ISO 15488 (DIN 6499) ER |
| Auswuchtgüte |
25.000 1/min, G2,5 |
| DCONWS |
3 – 26 |
| DLN |
63 |
| LPR |
100 |
| PSK | |
| Rundlauf |
< 3µm |
| THID |
M10x1 |
Description
Related products
Test arbor PSK 63 – 40 – 182
Application:
For the inspection of machine tools according to ISO recommendation R230 or for testing the tool spindle.
Delivery with test certificate
- All holders are made of forged steel
- Specific, low warpage hardened
- Surface hardened HRC 58~60
- Hardening depth 0,8mm~0,9mm
- Surface roughness Ra < 0,4 µm
- Tensile strength in the core of min. 800 N/mm? after DIN
- All functional surfaces fine machined
Zwischenhulse fur ISO 26623 (PSK) HSK 63 – PSK 50 – 90
Application:
For adaption from HSK-A to PSC (ISO 7388-1 to ISO 26623-1)
Delivery:
Clamping screw
Version:
Adapters HSK / PSK with axial clamping. Ground internally and externally. The internal thread provided for the coolant tube in the PSC toolholder is plugged with the socket-head screw incorporated in the adapter. The clamping screw incorporates a through hole, so the system is suitable for through-coolant feed. Suitable for tool arbor with polygonal shank (PSC) - ISO 26623-1.
End mill holder Weldon with cooling channels PSK 63 – 06 – 100
Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).
With coolant channels for optimal coolant at the cutting edge.
Delivery:
With clamping screw
Note:
From DCONWS = 25 on two clamping screws
DCONWS = 6 to 18 with two coolant channels
DCONWS = 20 to 40 with four coolant channels
For tools with through coolant an O-ring must be used.
