Click to enlarge
Shrink chuck 4,5° BT 50 - 16 - 120 €230.00
Back to products
Shrink chuck 4,5° BT 50 - 18 - 110 €216.00

Morse taper adaptor SK 50 – 4 – 65

€103.00

Application:
For clamping tools with Morse taper shank and thread according to DIN 228-1 form A.

Delivery:
With built-in tightening bolt

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

ADINTMS

DIN 2080
ADINTWS

DIN 6364
Auswuchtgüte

15.000 1/min, G6,3
BD

CNSC

A
CTWS

LPR

65
Rundlauf

< 5µm
SK

SK 50
THID

M16
Compare
Add to wishlist
Order Number: 501.08.04 Categories: ,
Description

Product information “Morse taper adaptor SK 50 – 4 – 65”

Application:
For clamping tools with Morse taper shank and thread according to DIN 228-1 form A.

Delivery:
With built-in tightening bolt

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined
2D & 3D Zeichnungen
Download 2D-Zeichnung.dxf
Download 2D-Zeichnung.pdf
Download 3D-Zeichnung.PDF
Download 3D-Zeichnung.stp

Related products

Compare

Combi shell mill holder SK 50 – 40 – 55

,
€89.00

Application:
For mounting milling cutters with transverse or longitudinal groove.

Delivery:
With retaining screw, driving ring and feather key

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Add to wishlist
Add to cart
Quick view
Compare

End mill holder Weldon SK 30 – 14 – 50

, ,
€47.00

Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).

Delivery:
With clamping screw

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Add to wishlist
Add to cart
Quick view
Compare

CNC-Drill chuck SK 30 – 0/8 – 60

,
€328.00

Application:
For mounting tools with straight shanks.

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Add to wishlist
Add to cart
Quick view
Compare

End mill holder Weldon SK 30 – 12 – 40

, ,
€47.00

Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).

Delivery:
With clamping screw

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Add to wishlist
Add to cart
Quick view
Compare

Combi shell mill holder SK 30 – 27 – 35

,
€61.00

Application:
For mounting milling cutters with transverse or longitudinal groove.

Delivery:
With retaining screw, driving ring and feather key

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Add to wishlist
Add to cart
Quick view
Compare

Boring bar blank SK 50 – 97 – 315

,
€220.00

Application:
For the manufacturing of special tools.

Note:
Cone and flange hardened and grinded. Soft body for later processing.

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Add to wishlist
Add to cart
Quick view
Compare

End mill holder Weldon SK 30 – 20 – 63

, ,
€47.00

Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).

Delivery:
With clamping screw

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Add to wishlist
Add to cart
Quick view
Compare

Morse taper adaptor SK 30 – 1 – 50

, ,
€47.00

Application:
For mounting tools with Morse taper shank and tang according to DIN 228-1 form B.

Delivery:

  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Add to wishlist
Add to cart
Quick view