Product information “ER-Collet chuck PSK 63 – 1/10 – 60 | ER 16”
PSK = PSK 63
Capacity = 1 – 10 (ER 16)
A = 60
D = 28
Application:
For mounting straight-shank tools in collets.
Delivery:
With balanced clamping nut
ER-Collet chuck PSK 63 – 1/10 – 60 | ER 16
€197.00
PSK = PSK 63
Capacity = 1 – 10 (ER 16)
A = 60
D = 28
Application:
For mounting straight-shank tools in collets.
Delivery:
With balanced clamping nut
| Typ |
426E, ER 16 |
|---|---|
| ADINTMS |
CCS – Polygonschaftkegel |
| ADINTWS |
ISO 15488 (DIN 6499) ER |
| Auswuchtgüte |
25.000 1/min, G2,5 |
| DCONWS |
1 – 10 |
| DLN |
32 |
| LPR |
60 |
| PSK | |
| Rundlauf |
< 3µm |
| THID |
-0 |
Description
Related products
Test arbor PSK 63 – 40 – 182
Application:
For the inspection of machine tools according to ISO recommendation R230 or for testing the tool spindle.
Delivery with test certificate
- All holders are made of forged steel
- Specific, low warpage hardened
- Surface hardened HRC 58~60
- Hardening depth 0,8mm~0,9mm
- Surface roughness Ra < 0,4 µm
- Tensile strength in the core of min. 800 N/mm? after DIN
- All functional surfaces fine machined
CNC-Drill chuck PSK 63 – 2,5/16 – 117
Application:
For mounting tools with straight shanks.
- All holders are made of forged steel
- Specific, low warpage hardened
- Surface hardened HRC 58~60
- Hardening depth 0,8mm~0,9mm
- Taper angle tolerance < AT 3 according to DIN 2080
- Surface roughness Ra < 0,4 µm
- Tensile strength in the core of min. 800 N/mm? after DIN
- All functional surfaces fine machined
Test arbor PSK 32 – 20 – 180
Application:
For the inspection of machine tools according to ISO recommendation R230 or for testing the tool spindle.
- All holders are made of forged steel
- Specific, low warpage hardened
- Surface hardened HRC 58~60
- Hardening depth 0,8mm~0,9mm
- Taper angle tolerance < AT 3 according to DIN 2080
- Surface roughness Ra < 0,4 µm
- Tensile strength in the core of min. 800 N/mm? after DIN
- All functional surfaces fine machined
End mill holder Weldon with cooling channels PSK 63 – 06 – 100
Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).
With coolant channels for optimal coolant at the cutting edge.
Delivery:
With clamping screw
Note:
From DCONWS = 25 on two clamping screws
DCONWS = 6 to 18 with two coolant channels
DCONWS = 20 to 40 with four coolant channels
For tools with through coolant an O-ring must be used.
