€420.00
PSK = PSK 63
d = 8
A = 160
D = 21
max. clamping depth = 36
Application:
For mounting straight-shank tools.
Note:
Toolholders suitable for induction-, contact- and hot air shrink units. O 3, 4, 5 with h4-tolerance and O 6 – O 32 with h6-tolerance
For O 3, 4 and 5 mm only solid carbide tool shanks must be used!
| ADINTMS |
CCS – Polygonschaftkegel |
|---|---|
| ADINTWS |
Schrumpffutter 4,5° |
| ADJRGA | |
| Auswuchtgüte |
25.000 1/min, G2,5 |
| BD | |
| BTED | |
| DCONWS |
8 |
| LPR |
160 |
| LSCN | |
| LSCX | |
| PSK | |
| Rundlauf |
< 3µm |
| TDCON | |
| THID |
M8x1 |
Product information “Shrink chuck 4,5° PSK 63 – 08 – 160”
PSK = PSK 63
d = 8
A = 160
D = 21
max. clamping depth = 36
Application:
For mounting straight-shank tools.
Note:
Toolholders suitable for induction-, contact- and hot air shrink units. O 3, 4, 5 with h4-tolerance and O 6 – O 32 with h6-tolerance
For O 3, 4 and 5 mm only solid carbide tool shanks must be used!
Application:
For mounting straight-shank tools with lateral flat according to DIN 1835 form B (Weldon).
With coolant channels for optimal coolant at the cutting edge.
Delivery:
With clamping screw
Note:
From DCONWS = 25 on two clamping screws
DCONWS = 6 to 18 with two coolant channels
DCONWS = 20 to 40 with four coolant channels
For tools with through coolant an O-ring must be used.
Application:
For mounting tools with straight shanks.
Application:
For adaption from HSK-A to PSC (ISO 7388-1 to ISO 26623-1)
Delivery:
Clamping screw
Version:
Adapters HSK / PSK with axial clamping. Ground internally and externally. The internal thread provided for the coolant tube in the PSC toolholder is plugged with the socket-head screw incorporated in the adapter. The clamping screw incorporates a through hole, so the system is suitable for through-coolant feed. Suitable for tool arbor with polygonal shank (PSC) - ISO 26623-1.
No account yet?
Create an Account
