Showing 1–12 of 35 results

Quick change tapping chuck 30 – M5-M22 – Gr.2

231.00

Application:
For the chucking of quick change adaptors for taps.


Note:
For machining centres with synchronous spindle.

Quick change tapping chuck 40 – M5-M22 – Gr.2

221.00

Application:
For the chucking of quick change adaptors for taps.


Note:
For machining centres with synchronous spindle.

Quick change tapping chuck BT 30 – M5-M22 – Gr.2

171.00

Application:
For the chucking of quick change adaptors for taps.


Note:
For machining centres with synchronous spindle.


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Quick change tapping chuck BT 30 – M5-M22 – Gr.2

222.00

Application:
For the chucking of quick change adaptors for taps.


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Quick change tapping chuck BT 40 – M5-M22 – Gr.2

423.00

Application:
For the chucking of quick change adaptors for taps.


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

Quick change tapping chuck BT 40 – M5-M22 – Gr.2

161.00

Application:
For the chucking of quick change adaptors for taps.


Note:
For machining centres with synchronous spindle.


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined