PART OF CATALOG

Solid carbide 2 flutes short 16mm 16,0 – 16 AlTiCrN coating

90.00

Application:
Coating: AlTiCrN, Excellent high-performance end mills, for processing material < 48HRC, for weldon shanks according to DIN 6535 HB.

ER-Collet with seal for IC ER25 | 430EA | < 15µm | O 13

40.00

Application:
Collets sealed with seal for IC DIN 6499 B (ISO 15488 B) ER-system


Note:
Only nominal size d can be clamped with sealing plug for internal cooling (applicable up to 21 bar) In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet.

Tapping chucks for synchronisation SK 40 – M3-M33 – 120 | ER 40

319.00

Application:
For machining centres with synchronous spindle.


Note:

  • Synchro tapping chucks compensate synchronisation errors.
  • Minimal length compensation on compression and expansion balances very small pitch differences between synchro spindle and tap, which can cause high frictional forces on the thread flanks.
  • A possible increase of axial force during the tapping process is reduced to a minimum.
  • Suitable for internal coolant.
  • Coolant pressure up to max. 100 bar.


Delivery:
With balanced clamping nut


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Morse taper adaptor – form F1 F1 – 50 – MK3

120.00

Application:
For mounting tools with Morse taper shank and tang according to DIN 228-1 form B.


Note:
With adjustable spray nozzles


Shrink chuck 3° SK 40 – 05 – 120

159.00

Application:
For mounting tools with straight shanks.


Note:
Toolholders suitable for induction-, contact- and hot air shrink units. O 3, 4, 5 with h4-tolerance and O 6 – O 32 with h6-tolerance


For O 3, 4 and 5 mm only solid carbide tool shanks must be used!
  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

Sealing disc | ER 20 DCONWS = 1,5

20.00

Application:
For sealing tools with internal cooling.


Note:
Sealing capacity up to 80 bar


Clamping range 0.5 mm (+0.1/ -0.4)

KPS-Prazisionsspannzange abgedichtet KPS 16 | < 5µm | O 11,0

57.00

Application:
For mounting straight-shank tools in collet chucks KPS-system. To use for high speed cutting and high precision milling.

FREE CONSULTATION

Have questions?
Leave a request