PART OF CATALOG

Sealing disc | OZ 16 DCONWS = 2,0

18.00

Application:
For sealing tools with internal cooling.


Note:
Sealing capacity up to 80 bar


Clamping range 0.5 mm (+0.1/?0.4)

ER-Gewindebohrer-Spannzange IK ER32 | 470GA | < 15µm | 12 x 9

46.00

Application:
For machines with rigid tapping. For safe clamping of taps. Collets sealed with seal for IC.

ER-Spannzange mit Kuhlkanalen ER25 | 430ECC | < 15µm | O 8

44.00

Application:
For mounting straight-shank tools in collet chucks DIN 6499.


Note:
Only nominal size d can be clamped, with cooling channels. In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet. (applicable up to 21 bar)

ER-Collet with cooling channel holes ER16 | 426EC | < 15µm | O 3

38.00

Application:
For mounting straight-shank tools in collet chucks DIN 6499.


Note:
Only nominal size d can be clamped, with cooling channels. In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet. (applicable up to 21 bar)

Quick change adaptors with safety clutch Size 2 | M20 | 16 x 12 | DIN 376

50.00

Application:
For mounting taps. For right-hand and left-hand threads. Type with adjustable safety clutch, which prevents the breaking of taps.


Note:
Quick change adaptors with safety clutch are supplied with a predefi ned torque, corresponding to the sizes of the threads.

HSS-E spiral flute taps set M3 / M4 / M5 / M6 / M8 / M10 / M12

125.00

Application:

1. Thread configuration with a special design, prevents overfeeding, thin thread and pitch diameter oversize.
2. Flute geometry with special design, better chip evacuation, prevents chip clogging, improves thread quality
3. Excellent performance on various work material: Stainless steel, carbon steel, alloyed steel, tool steel

ER-Collet chuck HSK 63 – 2/13 – 160 | ER 20

151.00

Application:
For mounting straight-shank tools in collets.


Delivery:
With balanced clamping nut


  • All holders are made of forged steel
  • Specific, low warpage hardened
  • Surface hardened HRC 58~60
  • Hardening depth 0,8mm~0,9mm
  • Taper angle tolerance < AT 3 according to DIN 2080
  • Surface roughness Ra < 0,4 µm
  • Tensile strength in the core of min. 800 N/mm? after DIN
  • All functional surfaces fine machined

 

 

FREE CONSULTATION

Have questions?
Leave a request